Uninterruptible Power System 800 Przewodnik Instalacji Strona 21

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 24
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 20
PROPERTY OF SOLIDSTATE CONTROLS, INC. 7/1998
All UPS Systems which are not plug-in compatible, should be able to be installed by a qualified
electrician. Further, SCI recommends that the customer purchase start-up supervision to be sure
that the equipment is installed and operating properly. Severe damage could result if the
equipment is installed improperly and start-up initiated. Also, even though the equipment was
tested and operating properly at the factory, damage could have been sustained during shipment.
Our thoroughly trained Field Service Technicians utilize procedures to detect damage or other
possible malfunctions due to shipping mishandling, thus avoiding time consuming delays.
Start-up supervision will include, but not necessarily be limited to the following:
1. Inspect incoming cable to assure that they are of adequate size. Inspect the cable
terminations in the unit to assure that they are properly made and are secure.
2. Inspect the inter-connections between bays to be sure that they have all been connected
properly and securely.
3. Perform voltage checks on all incoming services to assure all are within specification.
4. Inspect the DC connections to assure that proper polarity has been observed.
5. Inspect bypass source input and system output on three phase units to assure that proper
phase rotation has been observed.
6. Inspect battery installation, checking for cell damage, electrolyte level, inter-cell and inter-
tier or step connections and proper polarity of each cell.
7. Turn on the inverter and perform system output voltage, current and frequency checks.
Make any necessary adjustments to the equipment.
8. Acquaint the customer’s personnel with the equipment and system operation. Explain
routine maintenance of the equipment, including batteries.
SCI Field Service Technicians also provide detailed personalized training of customer’s service
personnel, if required, either at the time of start-up or at some other time convenient to the
customer. The customer should discuss these requirements with our Field Service Manager.
Przeglądanie stron 20
1 2 ... 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag